geodnet miner and its antenna

GEODNET Miner FAQ: Your Top 40 Questions Answered

The GEODNET network, now supporting over 20,000 active miners worldwide in 2025, continues to attract DePIN enthusiasts with its centimeter-precise location data and GEOD token rewards. As interest grows, so do questions about the Hyfix MobileCM miner’s setup, operation, and potential. This FAQ addresses the most common questions, providing a comprehensive resource, for current and prospective miners.

Frequently Asked Questions

1. What is the GEODNET miner, and what does it do?
The GEODNET miner, specifically the Hyfix MobileCM, is a triple-band GNSS receiver that collects real-time satellite data to support the network’s centimeter-accurate positioning services. It forms part of a global reference grid, earning GEOD tokens for users who maintain it.

2. How much does the GEODNET miner cost?
The miner is priced at $625.5, available through nordiccrypto.io with a 10% discount using the code "NORDIC10," down from its original $695.

3. What comes with the GEODNET miner package?
The package includes the MobileCM triple-band receiver, a survey-grade triple-band roof antenna, a 9m antenna cable, a WiFi antenna, a USB-C power cable, and a 0.3m mounting pole with brackets.

4. Where should I install the miner for best results?
Install it on a roof or open field with a clear 10-degree sky view, free of tall trees or buildings, to ensure optimal satellite connectivity and minimize data errors.

5. How much power does the miner require?
It uses approximately 10-20 watts, translating to a low electricity cost of about $1 per month, making it highly efficient for continuous operation.

6. What is the setup process like?
Connect the antennas and USB power, access the setup page at 192.168.4.1 via your phone’s WiFi, enter your home 2.4GHz network details and serial number, then register on the console to start mining.

7. How long does it take to set up the miner?
The process takes less than 1 hour, assuming a suitable location and basic tools.

8. What maintenance is required after installation?
Minimal maintenance is needed, primarily addressing WiFi or power issues.

9. How many GEOD tokens can I earn daily?
The miner currently earns 12 GEOD tokens per day, a figure adjusted post the July 2025 halving, reflecting the network’s reward structure.

10. What is the current value of the GEOD token?
As of September 06, 2025, the GEOD token is valued at $0.1568.

11. Can the antenna handle harsh weather conditions?
Yes, the antenna is unaffected by dust, bird droppings, or snow, with RF transparency at 1-1.5GHz. In high-wind areas like Patagonia, secure mounting is critical to prevent movement.

12. What is the maximum coaxial cable length?
The default 9m cable can be extended to 18m with an additional cable and extender, though beyond this, performance may degrade.

13. Is grounding the antenna necessary?
While not included in the Hyfix kit, grounding is recommended per NEC requirements in the USA. A lightning protector and ground strap to a building point can protect against surges.

14. Can I upgrade the WiFi antenna?
Yes, the 2.4GHz whip antenna with SMA connection can be replaced with a higher-gain model to improve connectivity in weak signal areas.

15. What happens if my miner’s RRR drops below 98%?
A Rolling Rewards Rate below 98% disqualifies you from full rewards. Ensure clear sky access and stable power to maintain performance.

16. How long is the miner’s warranty?
The warranty lasts one year, covering defects but excluding damage from water, overheating, or lightning.

17. What is the useful lifespan of the miner?
A reasonable estimate is five years, based long-term usage observations and hardware durability data.

18. Can I move my miner to a new hex after getting an NFT?
Yes, but you must rebind the existing NFT to the new location. If another NFT miner occupies the hex, your NFT becomes invalid, limiting redeployment.

19. Are there interferences with other antennas?
HNT antennas and TV satellites pose minimal risk due to different frequency bands. However, maintain a 400m distance from high-power LTE or TV towers to avoid multi-path issues.

20. How can I check my miner’s status?
Log into the console to monitor RRR, satellite connections, and data uploads.

21. What type of battery is best for off-grid setups?
LiFePO4 batteries, such as 100-225Ah models, are recommended for their cold-weather resilience, with heating systems to maintain performance.

22. Can I use a solar panel with the miner?
Yes, a 100W solar panel with a 576Wh battery and charge controller works well, a configuration tested by community members.

23. How much data does the miner use monthly?
The miner consumes 2-20GB per month, manageable with a $5-7.50 data plan.

24. What is the purpose of the GEOD token?
The GEOD token supports equipment discounts, data service acquisition, and advanced network features like staking, with buy-back-and-burn initiatives to manage supply.

25. How does the halving affect my earnings?
The July 2025 halving reduced daily rewards from 24 to 12 GEOD tokens balancing network growth and miner incentives.

26. Can I monitor my miner remotely?
Yes, devices like Victron’s Color Control GX or a simple IP voltmeter can provide remote data, though additional accessories may be needed.

27. What is a SuperHex, and how does it work?
A SuperHex is a high-reward area where staking 50,000 GEOD can boost earnings up to 14x for early miners.

28. How do I earn a Location NFT?
Achieve a 98% RRR or higher for 60 days to earn an NFT, which must maintain an 80% RRR to remain valid.

29. Is the miner affected by solar storms?
Solar storms can cause GPS drift, but GEODNET’s RTK technology mitigates this with a 55x accuracy boost.

30. Can I use a splitter with the coaxial cable?
No, splitters can cause interference and are not recommended which advises against extending beyond 18m without proper extenders.

31. What is the range of the MobileCM in NTRIP mode?
The miner offers a 20km range for maximum accuracy, with horizontal precision of 1cm per 10km.

32. How secure is the miner’s data?
Data is protected with cryptographic security, ensuring integrity for DePIN applications.

33. Can I power the miner with a USB-C plug?
Yes, a standard USB-C charger with 5V and 1-3A output is sufficient.

34. What happens if the miner stops working?
Without remote monitoring, a site visit may be needed. A ping reboot via a router like Teltonika can restart it.

35. Are there size recommendations for batteries for remote setups?
Batteries of 100Ah or higher are ideal for 10-day autonomy in alpine conditions, with gel batteries preferred over LiFePO4 in extreme cold.

36. Can I add heating to the battery for remote setups?
Yes, a temperature-triggered heater, as used in your described setups, prevents battery failure in sub-zero temperatures.

37. What is the miner’s data upload rate?
The upload rate averages 8kbps, equating to about 20GB monthly for dual-band units.

38. How often should I clean the antenna?
Cleaning is rarely needed, as RF signals pass through dust and snow, though occasional checks for physical damage are wise.

39. Where can I find more GEODNET resources?
Everything there is to know about GEODNET can be found at the GEODNET Miner Hub.

40. What solar controller is recommended for off-grid setups?
A 10A PWM controller is sufficient for a 100W panel, though a 20A model supports 200-300W systems.

Why This Matters
These answers equip you with the knowledge to operate your GEODNET miner effectively within the network’s growing ecosystem. At nordiccrypto.io, we offer the best discounts for DePIN crypto miners like GEODNET, WeatherXM, Onocoy, Aethir Edge, and Helium Mobile. For more details and updates, visit the GEODNET Miner Hub.

Back to blog

Leave a comment